Made with Pride in Bad Axe, MI

Thermax II

Thermax II

The Briney THERMAX II Heat Shrink Unit opens the door to professional grade Shrinker tooling technology. This system offers: 7.5 kw output power operating at 20 – 25 kHz, minimum 30% duty cycle, superior coil efficiency, and operating consistency. Safety features are also built in: over-current, over-voltage, and over-temperature protection of the tool holder.

Foolproof operation is designed into THERMAX II. Choose the coil that fits the toolholder nose, insert into the vertical slide, lower slide, and press the carbide or steel key switch on the simple control panel. The PLC manages the pre-programmed cycle from there. Toolholder bores expand in seconds to permit insertion or removal of the cutting tool. Coil retracts automatically after heating cycle is complete.

Cooling is accomplished rapidly with the most efficient fans available conveniently integrated into the base so you can prepare several tools at a time. Tool capacity ranges from .1875 – 1.00 in. (6mm – 25mm), 18.75 in length. THERMAX II is also provided with your choice of 5 different heat sinks for high-efficiency cooling, 4 heating coils, a cooling sleeve and down-size ring for base pot to hold other tapered toolholders.


  • Works with both USA-ANSI and European-DIN designed adapters
  • Works with both carbide and high speed steel cutting tool shanks


  • Ready-to-Use: accessories included with purchase of unit
  • Manufactured and serviced in the USA

Thermax II Induction Heating Unit

Part Number Description Qty
BTTIU-075-220-II Vertical unit with 208V/3 phase power requirement.
© 2018 Briney Tooling